BioReNuva / Barrier Cream Cleanser

JKT-0426G Updated Jun 30, 2026
Export
A luxurious high-oil cleansing cream with nearly 50% soybean and baobab oils for deep makeup dissolution, emulsified with ReNuva RL-50 at 6.3%. Phase A is heated to 60°C, then Phase B is added and homogenized at 10,000 RPM. Cool to 45°C before adding citric acid for final pH adjustment.
Phase A
Phase Instructions
No phase instructions provided.
Trade Name INCI Name Function Notes W/W %
Glycine Soja Oil
Glycine Soja (Soybean) Oil
 Emollient - 47.5000
BIKIRA® Baobab Oil
Adansonia Digitata Seed Oil
 Emollient - 5.2000
Calchem BTMS-25
Behentrimonium Methosulfate (and) Cetearyl Alcohol
 Conditioning Emulsifier - 1.5000
SorbiThix L100
Sorbeth-230 Tetraoleate (and) Decyl Glucoside (and) Sorbitan Laurate
 Thickener - 2.0000
TOTAL: 56.2000%
Phase B
Phase Instructions
No phase instructions provided.
Trade Name INCI Name Function Notes W/W %
ReNuva™ RL-50 (Rhamnolipid)
Glycolipids
 Biosurfactant - 6.3000
Cola®Teric COAB
Cocamidopropyl Betaine
 Amphoteric Surfactant - 18.9000
Water
Aqua
 Solvent - 14.6000
Glycerin
Glycerin
 Humectant - 2.1000
NaOH (10%)
Sodium Hydroxide
 pH Adjuster - 1.3000
Pentylene Glycol
Pentylene Glycol
 Humectant - 0.6000
TOTAL: 43.8000%

Specifications

Difficulty
Intermediate
Process Temperature
Hot + Cold
Viscosity
2000 mPa·s (semi-solid paste)
Appearance
Creamy white paste. Rich, emollient texture. Rinses to a milky emulsion.
pH Target
6 - 6
Application Area
Face
Stability Test
4 wks @ 40°C/50°C · Freeze-thaw ×3 · Emulsion stability & phase separation check T0 & T4w
Procedure
Heat Phase A to 60°C until melted. Add Phase B slowly under homogenization at 10,000 RPM. Cool to 45°C, adjust pH. Fill at 40°C.